When it comes to keeping things organized and safe, SPOD is the way to go. However, you may want to veer off the normal path and try something else. In this case, you want to ensure that you keep the same standards as those in SPOD. For people inexperienced when it comes to wiring in vehicles, this may seem like an uphill task. And your best bet may lie in getting the SPOD. But if you are up to the task or have some expertise in play, you can go with the alternative as follows:
In this article, we will cover how you can build a relay block that allows you to connect accessories to your vehicle. You will be happy to know that it is waterproof, and you thus have an assurance of safety. After you build this block, you can move on to adding accessories.
Note that this is merely an informative article that will not delve into the specific processes in great detail. As such, any damages, accidents, or injuries accruing from the same are through no fault of the author. It is thus best that you take your safety seriously during this process.
What will you build?
This guide will delve into how you can create a relay block, which some people refer to as a power distribution module. With this, you will have a central connection point for accessories in your vehicle. The block comprises fuses and relays that allow connections to both switched and non-switched accessories. It helps to note that this device will enable you to insert terminals into the rear side using fuses and relays at the front. It is weathertight and is thus safe to use with the required cavity plugs, cables, seals, and covers.
Do you need one?
If you look into SPOD vs. rough country or Apollointech, it is evident that people are after the same thing. All they want is to add accessories to their cars safely and straightforwardly. From water pumps to lights to radios, that is the goal. Note that you can add these accessories without using the relay block.
However, the more items that you add, the more the wiring gets complicated. And that is why you need this block to organize the electrical components to keep you and other users safe. Have you heard of fire hazards resulting from a poor electrical organization? It can happen, and the way to avoid this is to get serious with the wiring. Thus, when it comes to Apollointech vs. SPOD, the argument is largely about the safety and neatness of the wiring. That’s why aspects such as Apollointech install instructions come into play to ensure that you go about this the right way.
Why else would you need a relay block? It allows you to avoid branching off the OEM stock using fuse taps. Note that this is also possible without the block. However, doing so can overload a circuit, and this can create safety issues. It also helps to note that the use of relays reduces the amount of current flowing in the system. It is a win on all fronts. It is no wonder that people are rushing to get SPOD alternative Tacoma as well as other such options.
Building One
There are two options in this case. You can get one from the shop, or you can make one yourself. It is always best to make one where you can, as it helps you build on your skills and save costs. You get to learn a lot about electricity and connecting accessories, helping you stay safe when dealing with electrical components.
A good example would be SPOD troubleshooting. Where there is a need to find the cause of a problem, you should not have much trouble doing so when you have the necessary knowledge on the same. Also, you create a foundation with this relay block such that you can easily add accessories in the future.
Does it sound like a lot of work? It probably does. But the good news is that building a relay block is an easy task if you put in the time. You will make some mistakes in the process, and you will learn from them. In the end, you will be that much more knowledgeable. If you are unsure about building one, you can always get a ready-made option, such as the Apollointech pro.
Requirements
To make a SPOD alternative, you will need a fuse block, terminals, cable seals, a wire, cavity plugs, metri-pack connectors, busbars, a wire loom, relays, weather pack connectors, circuit breakers, a heat shrink, busbars, heat-shrink ring terminals, and a mounting bracket.
You will also need connectors, terminals, a wiretap, a fuse tap, a switch panel, a switch blank, copper crimp lugs, and switches. You can make substitutions for some of the parts where you deem it necessary, such as the use of Apollointech switch covers. You can get these items in both online and physical shops.
For the tools, you will need wire cutters, wire strippers, crimpers, a soldering iron, a heat gun, and terminal removal tools. When you have all that you need for this process, you can now move on to the building.
Process
Building the relay block involves several steps during which you must exercise caution. First, you need to mount the relay block and the ground busbars to the bracket. From here, you should insert the cavity plugs into the unused cavities before making the switch harness. Make the jumper cables and accessory cables as well before conducting the installation of fuses and relays.
Finally, you should fabricate the switch panel and wire the switch before installing the wiring harness. Electrical connections should follow before installing the relay block and testing the efficiency of your work.
While this article will not delve into specifics, you now have an idea of what it takes to build a SPOD alternative and its benefits. The author is not responsible for any accidents accruing from the use of this guide, and you should thus take caution during these processes.
Add comment